Is 80C535 Compatible with 80C31? - Programmers Heaven

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


Is 80C535 Compatible with 80C31?

Jusman_SJusman_S Posts: 1Member
Hello dear friends,

I have some experience with 8051 programming in Assembler.
Recently I have to repair several Vehicle ECU(Electronic Control Unit). The ECU employs two 80C535 microprocessor in the unit, so I wanted to test the 80C535.

Since it is difficult to find an 80C535 Tester, I decided to build a simple one myself. With many 8051 circuits are in the Internet, I was succeded in building an 80C31 Development Board. It can be connected to PC running Hyperterminal via RS232 port, and has a Monitor Program in the EPROM. I can download a hex format 80C31 program from the PC into the board's RAM and run it. It has also an 8 bit port to connect to the outside world.

Afterwards, I built a same board, but I substituted an 80C535 in place of the 80C31. I implemented some modification of course :
1. Set the Reset pin normally high, merely by connecting a 10
Sign In or Register to comment.