Waking up MSP430 with 300 mV signal - Programmers Heaven

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


Welcome to the new platform of Programmer's Heaven! We apologize for the inconvenience caused, if you visited us from a broken link of the previous version. The main reason to move to a new platform is to provide more effective and collaborative experience to you all. Please feel free to experience the new platform and use its exciting features. Contact us for any issue that you need to get clarified. We are more than happy to help you.

Waking up MSP430 with 300 mV signal

bhakthabhaktha Posts: 1Member

We have a peculiar problem on our hand ... Appreciate any help from the folks here on this forum.

We have an embedded system wherein we are using a MSP430F5508 running on a 3V coin-cell (CR2032). Power consumption is extremely important to us. We put the processor in LPM 4.x (low power mode) when the system is not being used. The processor wakes up on a interrupt on selected ports (the interrupts are edge triggered).

In our system it needs to be woken up with a 300 mV signal. Any suggestions on how to do this ?

Sign In or Register to comment.