Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Categories

Would you know How to Build the Connection between PC & GPRS Module?

Dear everyone,

I would ask some questions about GPRS connection.
Because when I use PC to connect GPRS Module.
I can use AT Command to control the Module,
Ex. AT+CGDCONT, AT+CGATT, AT+CGACT...etc.
when I send the ATD*99# to the Module,
the Module will response A PPP LCP Configure-request to PC and get into the Data Mode.
But when I resend the PPP LCP Configure-ack to the Module, It don't respoense any message to the PC.

Would you know how to get the connection between PC & GPRS Module?

Thanks!


Comments

  • mongkol_mdgmongkol_mdg Member Posts: 1
    : Dear everyone,
    :
    : I would ask some questions about GPRS connection.
    : Because when I use PC to connect GPRS Module.
    : I can use AT Command to control the Module,
    : Ex. AT+CGDCONT, AT+CGATT, AT+CGACT...etc.
    : when I send the ATD*99# to the Module,
    : the Module will response A PPP LCP Configure-request to PC and get into the Data Mode.
    : But when I resend the PPP LCP Configure-ack to the Module, It don't respoense any message to the PC.
    :
    : Would you know how to get the connection between PC & GPRS Module?
    :
    : Thanks!
    :
    :
    :

Sign In or Register to comment.