Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In with Facebook Sign In with Google Sign In with OpenID

Categories

We have migrated to a new platform! Please note that you will need to reset your password to log in (your credentials are still in-tact though). Please contact lee@programmersheaven.com if you have questions.
Welcome to the new platform of Programmer's Heaven! We apologize for the inconvenience caused, if you visited us from a broken link of the previous version. The main reason to move to a new platform is to provide more effective and collaborative experience to you all. Please feel free to experience the new platform and use its exciting features. Contact us for any issue that you need to get clarified. We are more than happy to help you.

Plz Help Me to do A/D and D/A

i knew embedded programming in c51 and iar but i don't knew how we can do A/D and D/A conversion with eg programs

Comments

  • adkoliadkoli Posts: 2Member
    : i knew embedded programming in c51 and iar but i don't knew how we can do A/D and D/A conversion with eg programs
    :
    Hi,
    Will you please elaborate your problem. A/D conversion is not possible with software. D/A conversion can be done.
    A/D Conversion:
    Signals in analog form are not discrete, hence they can't be stored. Since they can't be stored they are sampled and converted to digital form.
    D/A conversion depends on the quantizer step-size used in A/D conversion. You only de-quantize and keep the signal in digital form. And then u pass these signals to D/A converter hardware unit.

    Bye,
    Prashant Adkoli
  • haider_mhaider_m Posts: 3Member
    : i knew embedded programming in c51 and iar but i don't knew how we can do A/D and D/A conversion with eg programs
    :
    hi,
    through s/w u cant convert but if u want to that through h/w with no pain then chek out Intrsil Corporation,s 7135 for A/d conversion
    haider

  • revanur_harirevanur_hari Posts: 1Member
    : i knew embedded programming in c51 and iar but i don't knew how we can do A/D and D/A conversion with eg programs
    : hi
    you need you inetialise the A/D first and then the chip selection pind of A/D should be conned to the microcontroller and the data lines of the A/D should be connected to the data line of microcontroller through latch
    and chip selection is must which yu can select either by decoder or by PAL programming
    if clearly explain your design i can help you in this aspect
    thanks and regards
    harikrishna sharma



Sign In or Register to comment.